Posts Tagged ‘Aspart’
http://www.PreOp.com
Your doctor or diabetes educator may ask you to mix a short-acting or clear insulin
with an intermediate or long acting cloudy insulin in the same syringe so that both can be given at the same time.
* The only insulin that cannot be mixed is insulin glargine.
* In this example, the doctor has asked you to mix 10 units of regular, clear, insulin with 15 units of NPH cloudy insulin, to a total combined dose of 25 units.
* Always, draw “clear before cloudy” insulin into the syringe. This is to prevent cloudy insulin from entering the clear insulin bottle.
* Always do this procedure in the correct order, as shown in the following sequence.
Roll the bottle of the cloudy insulin between your hands to mix it.
Clean both bottle tops with an alcohol wipe.
Pull back the plunger of the syringe to the dose of the long-acting (cloudy) insulin in this example 15 units. You now have 15 units of air in the syringe.
Check the insulin bottle to ensure you have the correct cloudy type of insulin.
With the insulin bottle held firmly on a counter or tabletop, insert the needle through the rubber cap into the bottle.
Push the plunger down so that the air goes from the syringe into the bottle. Remove the needle and syringe. This primes the bottle for when you withdraw the Insulin later.
Pull back the plunger of the syringe to the dose of the shorter acting clear insulin in this example 10 units. You now have 10 units of air in the syringe.
Check the insulin bottle to ensure you have the correct clear type of insulin.
With the insulin bottle held firmly on a counter or tabletop, insert the needle through the rubber cap into the bottle.
Push the plunger down so that the air goes from the syringe into the bottle.
Turn the bottle upside down so that the air in it goes to the top.
With the tip of the needle kept in the liquid, withdraw the dose of clear insulin, in this example, 10 units.
Remove the needle and syringe.
Go back to the longer-acting, cloudy insulin bottle.
Turn it upside down. Insert the needle into the liquid and slowly pull back the plunger to measure your total dose, in this example, 25 units. You are now ready to give your injection.
Duration : 0:4:5
http://www.PreOp.com
Your doctor or diabetes educator may ask you to mix a short-acting or clear insulin
with an intermediate or long acting cloudy insulin in the same syringe so that both can be given at the same time.
* The only insulin that cannot be mixed is insulin glargine.
* In this example, the doctor has asked you to mix 10 units of regular, clear, insulin with 15 units of NPH cloudy insulin, to a total combined dose of 25 units.
* Always, draw “clear before cloudy” insulin into the syringe. This is to prevent cloudy insulin from entering the clear insulin bottle.
* Always do this procedure in the correct order, as shown in the following sequence.
Roll the bottle of the cloudy Insulin between your hands to mix it.
Clean both bottle tops with an alcohol wipe.
Pull back the plunger of the syringe to the dose of the long-acting (cloudy) insulin in this example 15 units. You now have 15 units of air in the syringe.
Check the insulin bottle to ensure you have the correct cloudy type of insulin.
With the insulin bottle held firmly on a counter or tabletop, insert the needle through the rubber cap into the bottle.
Push the plunger down so that the air goes from the syringe into the bottle. Remove the needle and syringe. This primes the bottle for when you withdraw the insulin later.
Pull back the plunger of the syringe to the dose of the shorter acting clear insulin in this example 10 units. You now have 10 units of air in the syringe.
Check the insulin bottle to ensure you have the correct clear type of insulin.
With the insulin bottle held firmly on a counter or tabletop, insert the needle through the rubber cap into the bottle.
Push the plunger down so that the air goes from the syringe into the bottle.
Turn the bottle upside down so that the air in it goes to the top.
With the tip of the needle kept in the liquid, withdraw the dose of clear insulin, in this example, 10 units.
Remove the needle and syringe.
Go back to the longer-acting, cloudy insulin bottle.
Turn it upside down. Insert the needle into the liquid and slowly pull back the plunger to measure your total dose, in this example, 25 units. You are now ready to give your injection.
Duration : 0:4:5
http://www.PreOp.com
Storage Insulins refrigerator temperature Insulin glucose sugar blood syringe Humalog Novolog bolus Lispro Aspart Pens needles
This program will demonstrate injecting Insulin.
The goal is to inject the insulin into the subcutaneous tissue between the top layer of the skin, the dermis and the underlying muscle layer.
The only concentration of insulin available in the United States is 100 units per milliliter. A milliliter is equal to a cubic centimeter. All insulin syringes are graduated to match this concentration.
Insulin syringes are available in various volumes, for example: 3/10 cc, which would hold a maximum dose of 30 units, 1/2 cc to hold a maximum dose of 50 units and 1 cc to hold a maximum dose of 100 units.
Some insulins are cloudy suspensions. To ensure uniform dispersion of the insulin in the cloudy suspension, roll the vial gently between your hands. Avoid vigorous shaking, which will produce air bubbles or foam and interfere with obtaining the accurate dose.
Wipe off the top of the bottle with an alcohol swab. Discard the swab.
Pick up the syringe and remove the needle cap. With the syringe held upright, pull the plunger back until the end of the plunger is at the mark of your dose,which in this example is 20 units. There is now air in the syringe.
Check the insulin bottle to ensure you have the correct type of insulin.
With the insulin bottle held firmly on a counter or tabletop, insert the needle through the rubber cap into the bottle.
Push the plunger down so that the air goes from the syringe into the bottle.
Turn the bottle upside down so that the air in it is at the top.
With the tip of the needle kept in the liquid, pull the plunger back to your dose. If any air bubbles are in the syringe, push the plunger back in and draw up the dose again.
Remove the syringe and needle from the bottle. Do not let the needle touch anything else until it touches your skin for the injection.
Wipe the skin of the chosen injection site with an alcohol swab and let the skin dry.
Pinch up the skin and put the needle fully through the skin at an 80 to 90 degree angle and push the plunger down completely.
Discard the syringe and attached needle into a puncture-proof container and replace the container’s screw cap.
Instead of a puncture-proof container you can purchase a special “Sharps” container with a hinged lid to store your used syringes and needles.
* When your storage or “Sharps” container is 3/4 full, dispose of it according to the policies of your local authorities.
The recommended sites for insulin injections are shown. Change the place of each injection by moving a couple of inches from the previous site.
By doing this, you can stay in one general area for several days.
Duration : 0:4:54
